Python Crazyradio Library

The python crazyradio lib can be found in the Crazyflie python library git repos https://github.com/bitcraze/crazyflie-lib-python/blob/0.1.22/cflib/drivers/crazyradio.py. It is a single file that implements the low level Crazyradio dongle functionalities.

Theory of operation

The Crazyradio is configured in PTX mode which means that it will start all communication. If a device in PRX mode is on the same address, channel and datarate, the device will send back an ack packet that may contains data.

   Crazyradio    Device
      _             _
      |             |
      |  Packet     |
      |------------>|
      |        Ack  |
      |<------------|
      |             |

This is an example on how to use the lib:

import crazyradio

cr = crazyradio.Crazyradio()
cr.set_channel(90)
cr.set_data_rate(cr.DR_2MPS)

res = cr.send_packet([0xff, ])
print res.ack                   # At true if an ack has been received
print res.data                  # The ack payload data

API

Crazyradio

Fields

None

Methods

[init]{.underline}(self. device=None, devid=0)

close(self)

set_channel(self, channel)

set_address(self, address)

set_data_rate(self, datarate)

set_power(self, power)

set_arc(self, arc)

set_ard_time(self, us)

set_ard_bytes(self, nbytes)

set_cont_carrier(self, active)

scan_channels(self, start, stop, packet)

send_packet(self, dataOut)

_radio_ack

Fields

Methods

None